TECHNICAL DESCRIPTION
PolyButylene Teraphalate polyester (PBT) is a semi-crystalline thermoplastic.

GENERAL PROPERTIES
PBT offers excellent mechanical properties combined with good chemical resistance. PBT has good impact resistance and toughness, low coefficient of friction & wear, and does not need lubrication. It also is resistant to chemicals, chlorine, water, and steam.

KEY PROPERTIES
  • No center line porosity
  • Superior chemical resistance
  • Low coefficient of friction
  • Good impact strength and ductility
  • Hand and durable surface
  • FDA, USDA, 3A Dairy approved grades
  • Replaces brass, aluminum, steel
  • UHMW, acetal
 
TYPICAL PROPERTIES OF PBT
PHYSICAL
ASTM or UL test Property PBT
D792 Density (lb/in3)
(g/cm3)
 0.0473
 1.313
D570 Water Absorption, 24 hrs (%) 0.07
MECHANICAL
D638 Tensile Strength (psi) 9,400
D638 Tensile Modulus (psi) 425,000
D638 Tensile Elongation at Break (%) 50
D790 Flexural Strength (psi) 11,600
D790 Flexural Modulus (psi) 420,000
D695 Compressive Strength (psi) 11,000
D695 Compressive Modulus (psi) -
D785 Hardness, Rockwell R120
D256 IZOD Notched Impact (ft-lb/in) 0.7
THERMAL
D696

Coefficient of Linear Thermal Expansion
(x 10-5 in./in./°F)

4.5
D648 Heat Deflection Temp (°F/°C) at 264 psi 200/93
D3418 Melting Temp (°F/°C) 420/215
- Max Operating Temp (°F/°C) 221/105
C177

Thermal Conductivity
(BTU-in/ft2-hr-°F)
(x 10-4 cal/cm-sec-°C)


 -3
 -3
UL94 Flammability Rating HB
ELECTRICAL
D149 Dielectric Strength (V/mil) short time, 1/8” thick 410
D150 Dielectric Constant at 60 Hz 3.3
D150 Dissipation Factor at 60 Hz 0.002
D257 Volume Resistivity (ohm-cm) at 50% RH 4.5 x 1016

Note: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control.

All values a 73°F (23°C) unless otherwise noted.

Home :: About Us :: Products :: Materials :: Ordering :: Tools :: Contacts

Engineering Laboratories | ©
360 West Oakland Ave. | Oakland, NJ 07436 | USA | 1.800.941.2525 | 201.337.8116 | FAX 201.337.2467
Website Design and Development by AIMG | Accurate Imaging, Inc.