Santoprene thermoplastic elastomers (TPEs) are a series of high-performance elastomers which combine the desirable characteristics of vulcanized rubber, such as flexibility and low compression set, with the processing ease of thermoplastics. Fitting into the mid-range cost and performance spectrum of both thermoplastic and thermoset rubbers, Santoprene TPE is accepted for a broad range of industrial and consumer product applications.

Its unique combination of material properties and processing ease permits the processor to achieve such critical goals as lower production costs, consistent quality and improved production performance. Santoprene TPE can be processed on standard thermoplastic equipment. It can be injection molded, extruded, blow molded and thermoformed with the efficiency and economy associated with thermoplastic materials. In addition, clean scrap from these operations can be reprocessed.

Santoprene TPE has the environmental resistance equivalent to general purpose EPDM rubber compounds, while fluid resistance is comparable to general purpose polychloroprene rubber compounds, a unique combination that lends itself to a broad range of applications. Its unmatched colorability, feel and aesthetics open new design opportunities in consumer applications.

• Performance through heat and cold
  Parts made from Santoprene TPE offer a constant service temperature range from -60°C to + 135°C (-81°F to +275°F) with no cracking or tackiness. Excellent heat aging combines with resistance to oil and grease for outstanding durability.
• Durability for the tough jobs
  Santoprene TPE has excellent resistance to cut growth while flexing, high tear strength and superior resistance to fatigue, and good resistance to many acids, bases and aqueous solutions.
• Broad range of flexibility
  Flexibility of Santoprene TPE ranges from supple, conformable 35 Shore A to tough, durable 50 Shore D. General purpose grades are suitable for most applications, and FDA-compliant, NSF-listed and medical grades are also available. Flame retardant grades meet Underwriters Laboratories requirements. These grades have UL 94 V-0 or UL 94 HB ratings.

SANTOPRENE^® 271-87 THERMOPLASTIC RUBBER

SUBCATEGORY
Elastomer, TPE; Polymer; Thermoplastic

KEY WORDS
Thermoplastic Elastomer, TPE

MATERIAL NOTES
A colorable thermoplastic specialty elastomer which complies with FDA regulations for rubber articles intended for repeated use as well as rubber articles in contact with non-fatty, non-oily foods as closures and sealing gaskets, formulated to replace thermoset elastomers like EPDM, polychloroprene, and chlorosulfonated polyethylene. It can be processed using injection molding, extrusion, blow molding or other melt processing techniques.

KEY FEATURES
UL Yellow card listed, UL94 HB Flame rating; Continuous temperature rating 1000 hrs @ 135°C; Excellent flex fatigue resistance; Excellent ozone resistance; May be used in contact with non-fatty goods as closure sealing gaskets in accordance with provisions of 21 CFR 177.1210 under the Federal Food, Drug, Cosmetic Act; Listed by National Sanitation Foundation under Standard #F-51 for aqueous, acetic, alcohol contact; Complies with 21 CFR 177.2600 "Rubber Articles Intended for Repeated Use"